Article

Montmorillonite Nanoparticles Effectiveness in Removal of Amoxicillin from Water Solutions

Davoud Balarak1, Fatemeh Ganji2, Kethineni Chandrika3, Shaziya Haseeb4★★ Corresponding author

  1. 1Department of Environmental Health, Health Promotion Research Center, Zahedan University of Medical Sciences, Zahedan, IRAN.
  2. 2Department of Environmental Health- Student Research Committee, Zahedan University of Medical Sciences, Zahedan, IRAN.
  3. 3Department of Biotechnology, Koneru Lakshmaiah Education Foundation, Vaddeswaram, Guntur, Andhra Pradesh, INDIA.
  4. 4Environmental Research Laboratory, Department of Applied Chemistry, Aligarh Muslim University, Aligarh, Uttar Pradesh, INDIA.

CORRESPONDENCE

Shaziya Haseeb

Environmental Research Laboratory, Department of Applied Chemistry, Aligarh Muslim University, Aligarh, Uttar Pradesh, INDIA.

mbehdasht75@gmail.com

Received: 20-02-2020; Revised: 01-03-2020; Accepted: 14-04-2020.

Volume 10, Issue 2 · pp. 122–126 · PUBLISHED · DOI: 10.5530/ijpi.2020.2.22

View on IJPI original site ↗

ABSTRACT

Objectives: In this article, novel montmorillonite nanoparticles (MON-NP) evaluated in order to facilitatethe sorption of Amoxicillin (AMO) from aqueous solutions in batch operations. Methods:Batch experiments were performed to study the influence of various experimental parameters such as contact time, adsorbent dosage, initial concentration of the AMO and temperatures at fixed solution pH. The Langmuir, Freundlich and Dubnin- Randkovich (D-R) models were subjected to sorption data to estimate sorption capacity, intensity and energy. Results:The optimum conditions of sorption were found as follows: a sorbent amountof 0.8 g in L of AMO solution (10 mg/L), contact time 90 min atfixed pH and temperature 7 and 25°C, respectively. To study the kinetics of removal process, three equations, i.e. Morris–Weber, Lagergren (pseudo first order) and pseudo second order were used. The AMO sorption process waswell described by the pseudo second order kinetic model. The maximum adsorption capacity (qe) from Langmuir isotherm model was determined to be 39.41 mg/g and for D–R isotherm was 32.47. Conclusion:The results indicate that MON-NP could be employed as a low-cost in wastewater treatment for the removal of AMO.

KEYWORDS

Open in new tab

REFERENCES

As published

Showing references and in-text citations exactly as published.

    Cite this article

    SELECT FORMAT

    Balarak, D., Ganji, F., Chandrika, K., & Haseeb, S. (). Montmorillonite Nanoparticles Effectiveness in Removal of Amoxicillin from Water Solutions. International Journal of Pharmaceutical Investigation, 10(2), 122–126. https://doi.org/10.5530/ijpi.2020.2.22